Spmm 5000

SPMM 5000

Spmm

The SPMM 5000 (Suspension Parameter Measurement Machine)

The SPMM 5000 from AB Dynamics is a class leading vehicle Kinematics and Compliance (K&C) test machine designed by suspension engineers for use by suspension engineers.

Designed to combine the most faithful possible simulation of on-road vehicle behaviour with the highest possible measurement accuracy it is the development tool of choice for suspension engineers around the world.

Spmm5000 Full Assy Layered With Transparency 1

Moving Body Platform

At the heart of the SPMM 5000 is the moving centre table which is precisely controlled in 6 degrees of freedom by six precision electromechanical actuators, so that a combination of roll, pitch, bounce and yaw motion can be applied to the vehicle body during K&C and MIMS testing. This design means the ground plane (road) remains fixed during vehicle cornering and braking simulations. Exactly as it does when driving on the road.

Mira As Installed Spmm 5000

Wheel Stations

The SPMM is configured with either two or four wheel stations. These apply X, Y and Delta forces and displacements to each wheel and then measure the resultant wheel forces, moments and displacements.

Piezoelectric load cell assemblies below each wheel provide high accuracy measurement of the 3 orthogonal wheel forces and the 3 wheel moments, whilst the wheel position measurement system accurately measures the X, Y, Z, steer, camber and spin motion of the wheel center.

During vehicle loading, the wheel stations also provide automatic adjustment for wheelbase and track. 

Electro Mech Actuators

Electrical Actuators

All axes are driven by electromechanical actuators. This provides the operator with a safe, clean and quiet environment where vehicle behaviour can be closely observed.

Electromechanical actuators apply precise inputs to the vehicle at frequencies up to 5Hz. The resultant wheel movement and force measurements are automatically processed using MATLAB scripts to produce an informative report and input files for either CarSim or CarMaker.

Dynamic Arm

Unrivalled Measurement Accuracy

The SPMM 5000 delivers unrivalled measurement accuracy. The Wheel Force measurement system uses the highest quality Kistler piezoelectric multi-component load cells to accurately measure the forces and moments applied to each wheel. Wheel displacements are measured using either our Draw Wire wheel position measurement system (WPMS), or the higher specification Dynamic Arm WPMS. A fully traceable calibration procedure is used to demonstrate the specified accuracies and cross talks, at frequencies up to 5Hz.

System Configuration and Options

The SPMM 5000 can be configured according to budget and requirements. A comprehensive range of upgrades and options are available in to enhance its capacity and test capabilities. Available options include:

  • Powered steering wheel
  • Automatic brake applicator
  • Moments of Inertia and Centre of Gravity measurement capability
  • K&C Inspect deflection measurement system and body deflection measurement systems
  • Hardware in the Loop testing capability
  • Dynamic, up to 5Hz, testing capability
  • Wheel substitutes for wheel centre compliance measurement
  • Vehicle model data generators
  • Analogue and digital input and output capabilities
  • CAN input and output capabilities
Reliability Design

Proven reliability and design

The SPMM has a reputation for outstanding reliability and robustness, with the first SPMM 4000, installed at MIRA in 1996, still in regular use today.

The SPMM 5000 uses the same proven design concept of the original machine, updated to improve functionality, usability and capacity to make it suitable for developing the next generation of vehicles. The first SPMM 5000 was installed at Horiba MIRA in 2014 - click here to watch the video. 

Dynamic Arm WPMS Accuracy

Sub range* Accuracy (0 – 5 Hz) Resolution
Fore/aft (X) & Lateral (Y) ± 10mm ± 0.02mm ± 0.005mm
Vertical (Z) ± 10mm ± 0.02mm ± 0.005mm
Steer ± 1° ± 0.004° 0.001°
Camber ± 1° ± 0.005° 0.001°
Wheel Spin ± 30° ± 0.01° 0.003°
*Contact AB Dynamics for cross-talk and full range accuracy

Wheel Force Measurement Accuracy

Calibrated Range* Accuracy
Fore/aft (Fx) & Lateral (Fy) ± 1750 N ± 5 N
± 15000 N ± 30 N
Vertical (Fz) 0 - > 5000 N ± 5 N
0 - > 30000 N ± 30 N
Steer Moment (Mz) ± 500 Nm ± 1 Nm
± 750 Nm ± 2 Nm
*Contact AB Dynamics for cross-talk and full range accuracy

Capacity

Minimum Maximum
Wheelbase 1960mm 4540mm
Track 1100mm 2082mm
Vehicle Mass 5000 Kg*
Rear Wheelpan ∅ 400mm 600mm✝
*6800 Kg if centrally loaded ✝With adaptor fitted, suitable for wide or dual tires

Body Motions

Range Accuracy Max Velocity*
Bounce ± 210mm ± 0.15mm 140mm/s
Roll ± 10° ± 0.02° 7°/s
Pitch ± 8° ± 0.02° 6°/s
*Max Velocity available with dynamic option

Wheel Motions

Range Accuracy Max Velocity*
Fore & aft (X) ± 150mm ± 0.15mm 100mm/s
Lateral (Y) ± 150mm ± 0.15mm 100mm/s
Powered Rotational ± 80° nominal ± 0.02° 6°/s
*Max Velocity available with dynamic option

To learn more about the SPMM 5000, discuss your requirements, or to arrange a demonstration, please contact AB Dynamics via SPMMEnquiries@abdynamics.com